Hospital Elevators

“LT Elevator” Hospital Elevators are designed to meet present-day Hospital needs. It is designed to carry bulky hospital equipment. Versatile Automatic Control System permits economical self-service or attendant operation. For a relatively small hospital, a minimum of two elevators are recommended so that at least one will always be available for use.

Important:

A car with an internal size 1600 mm x 2400 mm is recommended because it is necessary to have ample room for easy movement of beds and other equipment. The speeds range from 0.40 mps. for small 2-storey hospital to 2.5 mps. for Multi-storey building. Sound-isolated cars and rubber tyred car door hangers contribute to quite to operation. High-speed elevators with micro self-leveling expedite safe transfer of beds, stretchers, X-ray apparatus and other heavy equipment.

Description

NO.OF.UNIT 1 (One)
TYPE 16 Passengers Cum Bed Lift
LOAD 1088 Kgs
SPEED 0.35/0.63/1/1.5 (Mt/Sec)
CONTROL Microprocessor based Simplex with VVVF  Drive
CAR TRAVEL Ground floor to 3rd Floor
FLOOR RISE (ABOUT) 10.8 Meters (Approx)
NO.OF OPENINGS 4 nos  (All on same side)
NO.OF STOPS 4 nos
OPERATION Full Collective Control
LANDING ENTRANCE S.S. Side Slide Opening Auto Door
CAR ENCLOSURE S.S. Cabin
CAR ENTRANCE DOOR S.S. Side Slide Opening Auto Door
CAR FLOORING PVC Tiles
CLEAR DOOR OPENING (about) 900 mm               2100 mm height
LIFT WELL (Existing) (about) 1800 mm wide                   3900 mm deep
DOOR OPERATION Power operated
CAR INSIDE (about) 1150 mm wide                       2400 mm deep
REDUATION GEAR MOTOR Single Worm Traction Type , 3 Phase Lift duty Motor
POWER SUPPLY A.C. 415 volts, 3 phase, 50Hz ;   A.C. 230 V, 1 Phase 50 Hz.
MACHINE ROOM POSITION Directly above the hoist way
WIRE – ROPES Usha Martin
INSTALLATION Indoor
OVERHEAD 4400 mm
PIT 1600 mm
MACHINE ROOM DIMENSION 2800 mm Wide        4900 mm Deep       2500 mm Height(approx)